Kerdi 200 - 3'3" x 98' 5" Roll (323sf)

Schluter-KERDI is a bonded waterproof membrane with limited crack-bridging capabilities. It is made of soft polyethylene, which is covered on both sides with a special fleece webbing to anchor the membrane in the thin-set mortar. Schluter-KERDI was developed as a waterproofing membrane to be used in conjunction with ceramic and stone tile coverings. Tiles can be installed directly on Schluter-KERDI using the thin-bed method. Other trowel-applied covering materials, such as plaster, can also be used. Pre-cut sections of Schluter-KERDI are available for inside and outside corners, as well as for pipe collars. Use Schluter-KERDI-BAND, in widths of 5" (12.5 cm), 7-1/4" (18.5 cm), or 10" (25 cm) to seal butt joints or corner joints. Schluter-KERDI-FLEX, in 5" (12.5 cm) or 10" (25 cm) widths, is used to seal expansion joints or flexible edge joints.

Move Close

You might also like

Nobleseal TS Waterproofing & Crack Isolation Membr

Noble Deck Waterproofing & Crack Isolation Membr

Nobleseal Sis Sound Isolation Sheet 6' x 33.3' Roll

3' x 5' Hardibacker - Fiber Cement Underlayment ¼"

2" x 50' Fibreglass Cement Board Joint Tape

Screws (Box of 100) for Cement Board

DITRA Uncoupling Matt - 3'3" x 98' 5" Roll (323sf)

Kerdi Band - 5" x 98' 5" Roll

DITRA Uncoupling Matt - 3'3" x 45'9" Roll (150sf)

DITRA Uncoupling Matt - 3' 3" x 16' 5" Roll (54sf)

Kerdi Band - 10" x 98' 5" Roll

Kerdi Band - 5" x 16' 5" Roll

Kerdi 200 - 3'3" x 16' ½" Roll (54sf)